/How to choose connector metal and plastic material
Connector from the transmission of the signal to the point, can be divided into electrical connectors and optical connectors, here only for the electrical connector as an illustration.
Connector composition: material includes metal and plastic.
Selection of metal materials:
1. Mechanical life
The mechanical life of the connector refers to the plug life, which is usually specified as 500 ~ 1000 times.When the specified mechanical life is reached, the contact resistance, insulation resistance and withstand voltage of the connector shall not exceed the specified value.
2. Electrical performance
Rated voltage rated current contact impedance etc.
3. Environmental parameters
The main environmental parameters are environmental temperature, humidity, temperature, atmospheric pressure and corrosion environment.Connector in the use and storage, transportation process of the environment has a significant impact on its performance, so we must choose the corresponding connector materials according to the actual environmental conditions.
4. End connection mode
End connection means the contact of the connector to the wire or cable.
Weld the snap and wrap the puncture screw
The commonly used metal materials are phosphor bronze brass and quick cutting copper
Ductility, fatigue resistance, good corrosion resistance, C5191, C5102, suitable for elastic materials, but especially high elasticity, can choose C5210
2.Fast cutting phosphor copper
Is the phosphorus copper added 0.8%~4% Pb, cutting good, wear resistance, high conductivity, electrical appliances, electronic parts, gear, small screws and other applicable materials.
Quick - cut brass is divided into general quick - cut brass and lead - free quick - cut brass, generally used for PIN
Selection of plastic materials:
Introduction to plastic materials :(common plastic materials of our company are PA66, PBT, LCP, PVC, etc.)
High performance plastics
1,PEI: polyether imide 2, PEEK: polyether ketone 3, PES: polyphenyl sulfone 4, PPS: polyphenyl sulfide 5, PAR: polyaromatic 6, PSU: polysulfone 7, LCP: liquid crystal polymer 8, HTN: high temperature nylon (PA)9, PI: polyimide
1,PET: polyethylene terephthalate 2, m-ppo: modified polyphenyl ether 3, PC: polycarbonate 4, PBT: polybutylene terephthalate 5, NYION: nylon (PA)
1,ABS, propylene, butadiene, styrene terpolymer 2, POM, POM, TPE: thermoplastic polyester elastomer, PS: polystyrene. 5, PP, PP, PVC: polyvinyl chloride (PVC) 7, HDPE, high density polyethylene, LDTE: low density polyethylene, and PMMA: polymethyl methacrylate (strength), SAN: styrene - acrylic acrylic copolymer, 11 SMA: styrene maleic anhydride
Key points of plastic material selection:
(1) Flammability Properties
(2) Mechanical properties
(3) Material Analysis
(5) Weathering Properties
(6) Thermal Properties
NBC Electronic Technological Co.,Ltd(NBC），founded in 2006，our aim is: innovate product category,control first-class quality.We have wide range of space in fast connectors ,industrial connectors,power connectors,battery connectors,charging connectors,electrical connectors,high current connector ,Anderson power products,APP connectors,module connectors,battery connectors and so on .In the year 2019,we had go abroad and compete for the international market.
If you have any comments and suggestions about our module connectors.please call the service staff.
Please login on our page http://www.houd-intl.com to know more about the modul connectors.